Skip to main content

A Guide to Blood Pressure Monitors

As your heart beats, it pumps blood throughout your body through blood vessels. The strength at which this blood pushes against blood vessel walls is your blood pressure. 

When measuring blood pressure, you will always get two readings. The first is the systolic pressure i.e. the blood pressure while the heart is beating, and the other is the diastolic pressure which is measured while the heart is at rest, between beats. If blood pressure is too high (hypertension), there can be a lot of strain on your vessels as well as your heart, and this may lead to heart attacks and strokes. It is therefore very important to be able to monitor blood pressure, both in a clinical and an individual capacity.

Monitoring blood pressure gives physicians a snapshot of their patient’s circulatory system and it is essential in prevention and diagnosis of diseases, as well as routine check-ups. There are three types of blood pressure monitors that can be used, namely, mercurial, aneroid, and digital. The mercurial and aneroid types are manual devices, often referred to as sphygmomanometers. These devices are more cost effective than their digital counterparts but are slowly being replaced in clinical settings. 

Sphygmomanometers are made up of an arm cuff, a squeeze bulb that inflates the cuff, a stethoscope, and a gauge to measure blood pressure. When pressure in the cuff rises, a needle on a dial moves clockwise, and when pressure falls, there is an anti-clockwise movement. The markings on the dial indicate the pressure level. Digital monitors are battery operated and they use automatically inflating/deflating cuffs. The force of blood through the arteries is measured using a microphone and results are displayed on a digital monitor.



There are pros and cons to both monitoring systems and within each category there are a wide range of devices to choose from. 

SA Healthcare is the importer and supplier into the market of a wide range of Blood Pressure units for use in home or hospital settings. We sell only to medical companies. Please enquire through our web page www.sahealthcare.co.za or call one of our sales team on 021 555 4328.

Comments

Post a Comment

Popular posts from this blog

An Easy Guide to Pulse Oximeters

Oxygen is vital to system and organ function in our bodies. In order to be carried around the body, molecules of oxygen attach to the haemoglobin proteins in red blood cells. The amount of oxygen (measured as a %) in haemoglobin proteins is called ‘oxygen saturation’ and this percentage can be determined using pulse oximetry. The values from pulse oximetry are useful as they tell us how much oxygen is actually reaching the different organs and systems in the body. Pulse oximetry uses devices called pulse oximeters that attach to an area on the patient where blood flow can be measured (most commonly on the finger). Light is then shone through the skin it is positioned on and a detector on the other side measures the amount of light that makes it through. The amount of absorbed light is indicative of the oxygen concentration and as such, a pulse oximeter does not directly measure oxygen saturation but rather closely estimates it. Normal levels of oxygen saturation are between 95-100%

What is an Oxygen Concentrator and how does it work?

Well, the clue is in the name. These machines suck in normal air – which has roughly 80 % nitrogen and 20% oxygen and force it through a special sieve. They are used on patients who have poor lung function as the higher concentration of oxygen allows the patient to get sufficient oxygen. So, how exactly does an oxygen concentrator work? The oxygen concentrator’s sieves trap the nitrogen and pump out oxygen at concentrations of up to 95%. The purity of the oxygen depends on the size of the sieves and the power of the motor. From there the sieves hold onto the nitrogen until they are saturated. Most machines have a 6000-8000 hour life span. After this time, the sieves need to be replaced. Oxygen concentrators are not only convenient, but they are also affordable and do not need to be refilled on a regular basis. These factors make this medical device a commonly used item for oxygen therapy at home as well as on patients in hospital. SA Healthcare is one of th

2019 Africa Health Expo

This week Nicolas, Sheila and Andre represented SA Healthcare at the 2019 Africa Health Expo in Johannesburg. As Africa’s leading medical expo, Africa Health showcases the latest advances in healthcare products, healthcare services, and innovation, with hundreds of companies and medical professionals in attendance. This year, SA Healthcare , one of the biggest medical wholesalers in South Africa, implemented a new synergistic strategy with their suppliers. By integrating their company with their trusted agencies, a new, dynamic stand was created that showcased a wide range of quality products and brands. Contec , Charder Medical , Ca-Mi , Aeonmed , CU Medical , Well.D , Pukang , and Kelly Med were all represented together by SA Healthcare, and their products were exposed to an extensive audience. This new approach made for SA Healthcare’s most successful year at Africa Health in the company’s history! There was an intense interest in the new scale body composition scale